Chainsaw Parts - How To Keep Your Chainsaw In Top Working Order

Maintaining your chainsaw parts in good working order means performing regular maintenance on your saw.

Too many chainsaws run their race too early because of lack of maintenance when some simple checks following regular use could have well helped to extend the life of a machine. Badly maintained parts can compromise a person's safety.

Major manufacturers do their best to promote maintenance of chainsaw parts to their customers as it not only saves them unnecessary expense but also plays a big part in keeping the user from getting into trouble from a safety angle.

Husqvarna and stihl for example provide a ton of information on chainsaw maintenance and safety but they can do very little once the customer buys a saw and heads home with it.

Let's take a look at some of the important areas of a saw which require regular checks following use.

The chain

The chain is obviously one of the most worked parts of a chainsaw. Maintaining it in good order means longer use of your machine and limits safety issues.

Sharpening the chain is an important part of good chain maintenance. Experienced users will know the drill but inexperienced owners are well advised to seek the help of a professional. chain sharpening requires the sharpening the cutting teeth as well as the depth guages between them.

Watch the length of the cutting teeth as once they are below at least 4mm, the chain will need to be replaced. When placing the new chain on the saw, you'll need to set the right tension because a loose fitting chain can easily slide of while a tight fitting chain can have ramifications on the bar.

Other Chainsaw Parts

While a good working chain is paramount to any saw delivering top performance other parts of the chainsaw such as the clutch, brake, air filter, bar and flywheels all need regular checking.

Lubrication is another issue. Again this concerns the chain and a non-lubricated chain can have a serious domino effect on the well being of other chainsaw parts which in turn will lead to safety issues.

Yoga Mat Care

Festool Trion Jigsaw for Precision Woodworking

The Festool trion jigsaw comes equipped with all of the features expected from a high end tool manufacturer such as Festool. On the exterior, the trion offers a sleek, compact appearance that is easily maneuverable. Inside, this Festool jigsaw features a powerful 720-watt motor that can easily cut a 4-3/4" thick wood beam or a 3/8" thick steel plate.

There is a variable speed dial located on the back of the Trion's grip which can adjust the speed from 1000 to 2900 strokes per minutes. However, you cannot adjust the speed with one hand while operating the jigsaw. One of the best features about the trion jigsaw is the lack of vibration which is characteristic of many tools.

There a number of different blades that are designed to fit the trion. One of the best features of the Festool trion is how easy it is to change blades. It literally takes a matter of seconds to change blades. Simply lift the front lever to release the blade and insert a new blade. Unlike many other jigsaws, no tools are required for a blade change. The blade can be operated in several different stroke modes. Most people familiar with jigsaws call this an "orbit," but it refers to it as a "pendulum" action.

One of the best features about it is its ability to plunge cut without the need for a starter hole. This can be done with many jigsaws, but the difference is that the trion does not bounce or effect the quality of the cut. However, for this to be made possible, the base of the jigsaw needs to be adjusted to a different position.

Festool tools are very well-known for their ability to effectively collect dust, and this is no exception. Dust is collected through a large duct on the center of the jigsaw's base. Through the use of a chip guard fitted over the front of the jigsaw, dust is collected remarkably well. Even if the chip guard is removed, efficient dust collection will continue to take place.

Included with every Festool jigsaw is a Systainer storage chest, chip deflector, saw blade, and splinter guard. As with any other tool from Festool, the trion comes with a 3-year warranty which protects against any defects in materials or workmanship. In addition, the company offers a 30-day money back guarantee if you are not satisfied with the purchased product for any reason. Overall, the Festool trion jigsaw combines high performance and accuracy into a compact and maneuverable tool.

Yoga Mat Care